Module 1: IPv4 Addressing and Subnetting
- Hardware Addressing
- Logical Addressing
- Internet Protocol (IP)
- IPv4 Addressing
- Decimal to Binary Conversion
- Binary to Decimal Conversion
- The Subnet Mask
- IP Address Classes
- CIDR (Classless Inter-Domain Routing)
- Address Classes vs. Subnet Mask
- Subnetting
- Determining the Range of Subnetted Networks
- Private vs. Public IPv4 Addresses
- Reserved IPv4 Addresses
- The IPv4 Header
- Resolving Logical Addresses to Hardware Addresses
- The ARP Table
- Troubleshooting IP using ICMP
Module 2: IPv6 Addressing
- IPv6 Basics
- The IPv6 Address
- The IPv6 Interface ID and EUI-64 Format
- The IPv6 Address Hierarchy
- Link-Local IPv6 Addresses
- Site Local IPv6 Addresses
- Multicast IPv6 Addresses
- Required IPv6 Addresses
- IPv6 Addresses and URLs
- ICMPv6
- Auto configuration of Hosts
- Configuring IPv6 OSPF (OSPFv3)
- Configuring an IPv6 Tunnel
Module 3: TCP and UDP
- Transport Layer Protocols
- Port Numbers and Sockets
- Transmission Control Protocol (TCP)
- Establishing a TCP Connection
- Terminating a TCP Connection
- The TCP Header
- User Datagram Protocol (UDP)
Module 4: The Routing concepts
- Administrative Distance vs. Metric
- Classful vs Classless routing protocols
- Limitations of Classful Routing
- Static vs. Dynamic Routing
- Dynamic Routing Categories
- Distance-vector Routing Protocols
- Configuring Static Routes
- Advanced Static Routes Parameters
- Default Routes
Module 5: Routing Information Protocol
- RIP (Routing Information Protocol)
- RIP Versions
- RIPv2 Configuration
- RIP Timers
- RIP Passive Interfaces
- RIPv2 Authentication
- Altering RIP’s Metric
- Troubleshooting RIP
Module 6: Enhanced Interior Gateway Routing Protocol
- EIGRP (Enhanced Interior Gateway Routing Protocol)
- The EIGRP Topology Table
- EIGRP Route States
- EIGRP Metrics
- Configuring Basic EIGRP
- EIGRP Passive Interfaces
- EIGRP Auto-Summarization
- EIGRP Manual Summarization
- EIGRP Authentication
- EIGRP Load-Balancing
- EIGRP Stubs
- EIGRP, Frame-Relay, and Bandwidth
Module 7: Open Shortest Path First
- OSPF (Open Shortest Path First)
- OSPF Neighbors
- OSPF Designated Routers
- OSPF Network Types
- Configuring OSPF Network Types
- The OSPF Hierarchy
- LSAs and the OSPF Topology Database
- Configuring Basic OSPF
- OSPF Passive-Interfaces
- OSPF Authentication
- OSPF Virtual Links
- OSPF Area Types
- OSPF and Default Routes
- Advanced OSPF Configuration
Module 8: IS-IS (Intermediate System -to- Intermediate System)
- IS-IS Fundamentals
- IS-IS Protocols and Addressing
- IS-IS Packet Types
- IS-IS Neighbors
- The IS-IS Hierarchy
- Basic IS-IS Configuration
- IS-IS Authentication
Module 9: Border Gateway Protocol
- Border Gateway Protocol (BGP)
- When to Use BGP
- Configuring BGP Neighbors
- BGP Synchronization
- BGP Route-Reflectors
- BGP Attributes
Module 10: Advanced Routing Functions
- Route Redistribution Basics
- Redistributing into RIP
- Redistributing into OSPF
- Redistributing Static and Connected Routes
- Pitfalls of Route Redistribution – Administrative Distance
- Access Control Lists (ACLs)
- Telnet Access List
- Advanced Wildcard Masks
- Route Filtering and Route-Maps
- Route-Maps
- Multicast Types of “packets”
- Multicast Concepts
- Multicasts and Routing
- Multicast Path Forwarding